People install skylights so as to receive natural light and not water. Installing a solar skylight in a room can certainly make it look bigger and brighter. It causes a lot of annoyance if the dome skylights start giving and leaking water instead of light. The leakage from your solar skylight can be a really huge botheration, and this problem needs to be fixed as soon as possible as to not make things worse. There can be several causes for this leakage like weather, faulty installation, damaged flashing, roof shingles caulking, and others. To find out where the leakage started, do not ignore any small dripping as it could lead to a major problem later on.
This article tackles more insights about how you can fix a leak on you diamond skylights.
How to confirm where the leakage is
To confirm that there are leakages, examine the trim boards and drywall surrounding the belle skylights. If they are wet more than how the regular condensation should be, then it would be confirmed that there is definitely water seepage.
The preparations needed before leakage repair
Make sure that it is easy to reach to the roof. Check out the roof skylight, inspect the joints, flashing, and screw heads, corners, and the area where there is a risk for the entry of water. Buy an asphalt roof tube sealant to fasten the roof with flashing. Seal the affected region and also clear debris or leaves gathered there if any and verify that there is no crack. Press the decking or roof area around light with a foot to make sure that it is not damaged. If it is not that big, then seal with silicon layer along the length of crack if it is small. Starting from the top, move down slowly on one side and then shift to another side.
When all else fails…
In case it is impossible to seal it or if it is completely wrecked, the replacement of the solar skylight would be a better option. If you feel like you haven’t done enough to repair it, read the user manual carefully and follow the directions. You can find every single detail you need mentioning in the user handbook. The installation would be successful only when one reads the instructions carefully given in the user handbook. Do not feel miserable if you are not able to stop the leaking up to hundred percent. Every person can only mend up to sixty percent of roof skylight in the first attempt. Still, many of these new light sources today come with self-curbing flash. This implies that an installer does not anymore need to build a curb for the skylight to rest upon.
Still, if you are not able to reach to the top of the roof, do not take the risk as there are many professional roofers who will do it perfectly. It is not an obligation to go for the do-it-yourself method. Look around for the reliable repair firms and make sure they are the best experts to entrust with the repair for your roof skylights in your locality. Give priority to your safety as compared to money. For more information, visit their website at: http://customskylights.com.au/products/illume